What makes steam different

A conventional shower mostly sheds liquid water down the walls. A steam shower fills the enclosure with hot vapor under slight pressure, and vapor moves through any gap it finds, including the ceiling, which in an ordinary shower barely gets wet. Steam enclosures are usually built with a sloped ceiling, a vapor-tight door and a continuous membrane on walls and ceiling for that reason.

In large primary baths, steam units are often installed during a remodel of an older shower. If the original wall assembly was reused, or the membrane stops short at the ceiling, warm vapor can condense inside the wall on the cold side. The closet, dressing room or attic space beside the shower is where the evidence tends to appear first.

Signs worth investigating

  • Musty smell in a walk-in closet that shares a wall with the shower
  • Peeling paint or a brown halo on the ceiling just outside the enclosure
  • Grout that stays dark long after the shower has been used
  • Loose or hollow-sounding tiles, especially high on the walls
  • Rust on the steam head or water marks below the steam generator's location
  • Dark staining on attic framing directly above the bathroom

Repair options and what each actually addresses

ApproachWhat it fixesWhat it leaves
Regrout and resealSurface grout wearAny failure in the membrane behind the tile
Spot removal of a few tiles for inspectionLets moisture readings be taken inside the wallDoes not repair anything by itself
Remove tile and backer on the affected wallsAllows contaminated materials to be removed and the membrane rebuiltRequires matching or replacing tile
Full enclosure tear-out and rebuildReplaces the entire assembly with a continuous vapor barrierLargest disruption; needs a tile setter and possibly a plumber

Questions for the remediation contractor and the tile installer

  1. What moisture readings did you take in the adjacent closet or attic, and where?
  2. Is the steam generator and its drain part of the inspection?
  3. If the shower is opened, who decides how far the removal goes?
  4. What membrane or vapor barrier will be used in the rebuild, and does it cover the ceiling?
  5. Will the steam unit's manufacturer requirements be followed for enclosure design?

General information for Cherry Hills Village, not a quote or professional advice. In an emergency, call 911.